30-day money back guarantee
Unlimited license period
Free 1 year minor updates
Large discounts on major upgrades
Fast hard drive problems
Ability to detect physical bad sectors on
a hard disk drive surface.
Ability to repair bad
sectors (magnetic errors) on a hard disk surface using Hysteresis loops generator.*
technology is originally developed by Dmitriy Primochenko
No data losses in any mode!
Corrupted data recovery
(making unreadable data readable)
User friendly intuitive interface
Easy to use, no complex settings.
You do not need to change a lot of complicated and unnecessary settings. We
have already set up the product for you for best performance and results.
The product ignores file system, scans
disk at physical level. It can be used with FAT,
NTFS or any other file system, and also with unformatted
or unpartitioned disks.
Prescan mode (very useful
for fast determination of bad sectors location, if a hard drive has a large
number of bad sectors. Saves your time. Bad hard drives are
scanned in this mode even faster than good drives!)
Starting process directly under
Bootable regenerating flash
can be created from the program and used to automatically start regenerating
Bootable regenerating CD / DVD allows
starting regenerating process under DOS automatically.
Working with any existing file system
without losses of any data
Working with any operating system without
losses of any data (bootable regenerating CD / DVD or flash should be used
for non-Windows operating systems)
Normal scan mode has faster scanning speed
4K sector size support
Automatic process resume
in any mode (except CD/DVD)
Multiple hard drives better support
Real-time hard drive condition monitor.
HDD Regenerator realtime monitor is more poweful and precise than ever in
timely prediction of hard drive problems.
Other enhancements (including temperature indicator, convenient range of sectors selection, bad SMART status indication, overheating indication, etc.)
Hard disk drive is an
integral part of every computer. It stores all your information. One of the most
prevalent defects of hard drives is bad sectors on the disk surface. Bad sectors
are a part of the disk surface which contains not readable, but frequently
necessary information. As a result of bad sectors you may have difficulties to
read and copy data from your disk, your operating system becomes unstable and
finally your computer may unable to boot altogether. When a hard drive is
damaged with bad sectors, the disk not only becomes unfit for use, but also you
risk losing information stored on it. The HDD Regenerator can repair damaged
hard disks without affecting or changing existing data. As a result, previously
unreadable and inaccessible information is restored.
How it works
Almost 60% of all hard drives damaged with
bad sectors have an incorrectly magnetized disk surface. We have developed an
algorithm which is used to repair damaged disk surfaces. This technology is
hardware independent, it supports many types of hard drives and repairs damage
that even low-level disk formatting cannot repair. As a result, previously
unreadable information will be restored. Because of the way the repair is made,
the existing information on the disk drive will not be affected!
Can the HDD Regenerator repair your drive?
Almost 60 % of damaged hard disks can be
repaired by regeneration. You can always
download free demo version and try to
regenerate the first found bad sector. The main purpose of the unregistered demo
version is to display a report which contains information about the possibility
to regenerate the entire disk by means of the registered full version. If the
first found bad sector has been successfully regenerated, you can buy the
product to regenerate all bad sectors on your hard drive. If the first bad
sector has NOT been successfully regenerated, then replace your hard disk drive
as soon as possible.
HDD Regenerator's Delays Detected
If you see delays under Windows, it is recommended to rescan the drive from a bootable regenerating CD or flash.
If your hard drive is external, it is recommended that you connect it as an internal drive.
Generally, 1-2 delays
are not a problem.
Permanent delays mean that the hard drive has sectors with long access time. A drive with permanent delays is actually
a failing drive and may cause data losses. You can try to regenerate such sectors using the "Regenerate all sectors in a range" option. Also, the delays can be regenerated in the “scan and repair” mode, if the following both conditions are met:
- The hard drive has been completely scanned at least 1 time.
- The hard drive
does not contain bad sectors.
Since the program does
not change the logical structure of a hard drive, the file system may still show
some sectors marked earlier as "bad", and other disk utilities such as Microsoft's chkdsk
will detect logical bad sectors even though the disk has been successfully
regenerated and is no longer damaged by physical bad sectors. If you want to
remove these marks, repartition the hard disk drive.